|
Blockers to prevent routing in the wrong openings when routing full pitch through dovetails and 3/4″ box joints
| ![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
- Bit depth gauge for half-blind dovetails
![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
24″ stop rod for limiting router travel in half-blind dovetails and positioning side stop in box joints
| ![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
- 1/2″ 8° dovetail bit
- 1/2″ 14° dovetail bit
- 3/8″ straight bit
- 1/2″ straight bit
![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
1/8″ ball end hex key for jig assembly and side stop and latch adjustment
| ![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
- e10 guide bushing for your router
- Pin wrench to adjust and tighten bushing
![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
Four cam-action speed clamps for mounting work pieces to the jig
| ![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
- Two side stops for mounting workpieces, and adjustable for all joint types
![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |
|
Five double-sided quick reference instruction strips, inserted in top of jig
| ![](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%200%20100'%3E%3C/svg%3E) |